PRO Test Kit for MDMA and Cuts Identification

Questions?

• What is PRO Test Kit for MDMA and Cuts for?

  PRO Test Kit for MDMA and Cuts includes 5 reagent tests best for MDMA, MDA, 2C-B or meth/amphetamine, but also suitable for benzofurans, cathinones, opioids and more. It is used to positively identify MDMA, MDA, meth/amphetamines, 2C-B/C/H/I, 5-MAPB, 6-APB, 6-APDB and to rule out cathinones, DXM, PMA/PMMA, or different, less predictable, less desirable, highly toxic dangerous drugs. Multiple reagents are required to detect adulterants and increase analysis precision.

• What is included in PRO Test Kit for MDMA and Cuts?

  PRO Test Kit for MDMA and Cuts includes 5 reagent tests: Marquis, Mecke, Robadope, Simon’s and Zimmermann, absorbent vermiculite, a porcelain reaction plate, a spatula, gloves, instructions and app for all test kits and over 800 substances. Every bottle contains 5 ml (liquids) or 10 ml (crystals), 100 tests of each in total. High quality HDPE and brown amber glass protect reagents from light, plastic and moisture to ensure prolonged shelf life. Child-proof caps guarantee 0 spills.

• What is each reagent for identification for?

  PRO Test Kit for MDMA and Cuts is best for idenitfying MDMA, MDA, 2C-B or meth/amphetamine, but it is also suitable for benzofurans, cathinones and opioids.

  To compare reagents, check the table below. A ➕ sign indicates confirmation of the expected substance; at least two are recommended. A ➖ sign indicates exclusion of specific admixtures. A blank field indicates no use.

  

  • Cannabis (4-AP) – main test for THC / CBD, helps rule out synthetic cannabinoids
  • Ehrlich – main test for all indoles, e.g. lysergamides and tryptamines but also 5-HTP and more, secondary test for cocaine
  • Hofmann – main test for lysergamides and tryptamines, more precise but slower than Ehrlich
  • Froehde – main test for most powders, secondary test for ketamine and amphetamines, long shelf life
  • Liebermann – main test for most powders, secondary test for cocaine (detects levamisole)
  • Marquis – main test for most powders, secondary test for ketamine, mephedrone and psychedelics
  • Mecke – main test for most powders, secondary test for cocaine, ketamine and mephedrone
  • Morris – main test for cathinones, cocaine and ketamine, can tell apart some novel dissociatives
  • Robadope – main test for primary amines, e.g. MDA, amphetamine or PMA
  • Simon – main test for secondary amines, e.g. MDMA, meth, mephedrone, methylone or PMMA
  • Zimmermann / Beam – main test for cathinones and benzodiazepines in geneal, detects also CBD
    
    

  Reagents Mandelin and Scott have been discontinued and replaced by superior Morris reagent. 

  • Fentanyl Test Strip to detect fentanyl, even mixed in another substance.
  • Nitazene Test Strip to detect nitazenes, even mixed in another substance.
  • Xylazine Test Strip to detect xylazine, even mixed in another substance.
    
    

  Reagents for identification can indicate PRESENCE, but not QUANTITY. Mixtures can only be detected with reagents if the additive causes a darker color reaction than the expected substance. Test strips can detect PRESENCE in any sample. To detect all components and estimate their quantity, combine the test strips and identification reagents with a TLC purity test.

• How to use PRO Test Kit for MDMA and Cuts?

  GET ALL TOOLS

  First, prepare a clean white testing surface – ceramic or glass is the best, e.g. bottom of a mug or a plate. Get your sample, reagents, a sharp tool / scoop and paper towels.

  PREPARE SAMPLE, ABOUT THIS BIG -> ●   

  If testing a pill, powder or crystal, crush it finely. If testing a liquid, dry one drop on paper or clean ceramic surface. A bigger sample can cause a stronger reaction. You need a new sample for each test.

  ADD ONE* DROP (OR PILE) OF REAGENT

  Shake bottles hard before use, then tap firmly to shake down any reagent stuck in cap. Do not let a bottle touch sample or you will ruin the rest of the reagent. Use just enough reagent to cover a sample. If using crystals avoid air pockets by flattening crystals onto sample using a clean tool. *Do not combine reagents except for „A” and „B” bottles.

  OBSERVE FOR UP TO 3 MINUTES*

  Disregard any color change after 3 minutes. Do not overinterpret your results, consider that color change reaction is always fastest and most vivid in the part where biggest surface of reagent touches sample, compared to its edges. Over time reaction will degrade due to air contact. Take photos.

  COMPARE RESULTS

  Compare color change with instructions. Reagents can indicate PRESENCE, but not QUANTITY. Adulterants can be detected with reagents only if they cause a darker color change than the expected substance. To detect all ingredients and estimate their amount pair reagents with a TLC purity test kit.

  Clean used reagent tools / testing surface with lots of running water and detergent, avoid contamination.

• How to interpret results of PRO Test Kit for MDMA and Cuts?

  

  
  Expected MDMA test kit results:

  • Marquis reagent – instant black
  • Mecke reagent – instant green > black
  • Robadope reagent – no pink color change
  • Simon’s reagent – instant blue
  • Zimmermann reagent – no strong color change

   

• How to handle MDMA reagent test kit?

  Drug testing kits contain toxic and/or corrosive chemicals, strong enough to burn skin and clothing. Keep out of eyes and mouth. Keep away from children and animals. Always use in a well-ventilated area. Wear gloves (supplied) when handling the bottle and cap. Wear protective eyewear. Never point towards face etc. If you get some on you/clothing, then immediately wash with lots of soap and water. Dispose of any unwanted reagent with running water, ventilate. Store reagents standing up and away from heat in a cool, dark place. The average shelf life of 2 years can be significantly extended by storing in a fridge or freezer (warm up to room temperature before use).

  Reagents deteriorate with time or due to contact with air, especially if exposed to sunlight or not refrigerated. If you are uncertain whether the reagent will work, test it with an already confirmed sample.

• How to test MDMA for fentanyl?

  Use fentanyl test strips (a fentanyl test kit)

  

  METHOD 1   

  If testing a benzo/opioid pill, crush one in a plastic baggie and dump out the powder.  Then add 10 drops of water into the baggie and mix well. Dip the test strip no higher than the thick line. Wait 15 seconds. Put the strip away and check in 5 minutes.

  METHOD 2

  Mix 100 mg of sample in 200 ml of water. Dip the test strip no higher than the thick line. Wait 15 seconds. Put the strip away and check in 5 minutes.

  COMPARE RESULTS

  1 line = fentanyl, 2 lines = no fentanyl. Faint lines also count. Ignore fentanyl tester results after 5 minutes.

• What types of tests are available?

  

• More questions?

  Click here to see our main FAQ on the home page.